TrafiCam x-stream combines a CMOS camera and video detector in one unit. TrafiCam x-stream sensors detect and monitor moving and stationary vehicles at signalized intersections and collect traffic data at intersections or interurban roads. Via detection outputs or via IP protocol, vehicle presence information is transmitted to the traffic controller so that signal timing can be adjusted dynamically. TrafiCam x-stream offers streaming video at full frame rate, to be used for traffic monitoring in a control room.

Course curriculum

    1. General Introduction

    2. Product Introduction

    3. System-Architecture-EURO

    4. System-Architecture-EDGE

    5. Components-EURO

    6. Components-EDGE

    7. Installation-guidelines-EURO

    1. Installation-Exploration

    2. IP-Connections

    3. Time-Synchronization

    4. Setting-Zoom-Level

    5. Device-Name-and-DST

    6. Presence-Detection-Zones-Overview

    7. Add-Presence-Zones

    8. TCT-Assigning-Outputs

    9. Vehicle-Counting

    10. Overlay-Information

    11. Sending-Configuration

    12. Viewing-Streaming-Video

    1. TCT-Offline-Networks

    2. Delay-Extend-Timing

    3. LED-On-Off

    4. Reboot-Reset-Device

    5. Detection-Error-and-Outputs

    6. Set-Recall-Functions

    7. Detection-Suppression-Functions

    8. Privacy-Zones

    9. Streaming-Video-Parameters

About this course

  • $490.00
  • 28 lessons
  • 0.5 hours of video content

Pricing

Self-study

  • 400 eur

  • 460 usd