ThermiCam2 is an integrated thermal sensor and detector for vehicle, vulnerable road user, and wrong way driver detection. ThermiCam2 does not need light to operate, and instead uses the thermal energy emitted from road users. This enables the sensor to detect vehicles and vulnerable road users at night, over long distances, and in harsh weather conditions. With available 640x480 resolution, the ThermiCam2 offers 24/7 traffic detection for a wide range of applications.

Course curriculum

    1. Introduction

    2. Which topics interests you the most? (4 most preferred and 1 least preferred)

    1. Introduction

    2. Architecture

    3. Principles

    4. Hardware

    1. About this lesson

    2. Select the right lens

    3. The camera position

    4. Connect over WiFi

    5. Connect with Scantool

    1. BPL Architecture

    2. Mount on pole

    3. Connect connector

    4. Mount connector

    5. Connect to interface

    6. Fixing antenna

    7. Power, Cable diameter, Cable length

    1. PoE Architecture

    2. Mounting ThermiCam

    3. Connecting connector

    4. Mounting connector

    5. Fixing antenna

    1. Introduction

    2. Installation - Select the right lens

    3. Installation - Position camera

    4. Installation - Installation pitfalls

    5. Configuration Principles

    6. Configuration - Open ThermiCam2

    7. Configuration - calibration

    8. Configuration - vehicle presence zones

About this course

  • $660.00
  • 55 lessons
  • 1 hour of video content